FIND NEWAE TECHNOLOGY PRODUCTS ON MOUSER ELECTRONICS
.png)
ChipWhisperer Level 1 Kit
MSRP:
$690 USD
The SCAPACK-L1 includes a ChipWhisperer-Lite Capture along with a UFO Board and three targets: an 8-bit RISC, a 32-bit Cortex-M4 (STM32F3), and a 32-bit Cortex-M0 (STM32F0). This kit allows you to complete almost all of the ChipWhisperer tutorials, along with working with the collection of CW308 UFO Boards.
The ChipWhisperer-Lite integrates hardware for performing power analysis measurement, device programming, glitching, and serial communications into a single board. This allows you to program the included XMEGA or STM32F targets.
Features
-
ChipWhisperer-Lite features 105 MS/s ADC with adjustable gain.
-
Perform side-channel power analysis, voltage fault injection, or clock fault injection.
-
CW308 UFO Board features low-noise power supplies, probing points, and connectors to simplify usage.
-
XMEGA 8-bit RISC Target.
-
STM32F0 Cortex-M0 Target.
-
STM32F3 Cortex-M4 Target.
Educational Material
Using our Jupyter notebooks, you can learn how DPA works, how to break password checks, how fault injection works, and even more. Or use ChipWhisperer-Lite with our online training offerings.
Designed for DPA
ChipWhisperer-Lite is designed for power measurements. It integrates a high-gain LNA with a 10-bit ADC, and a flexible synchronous sampling mechanism unique to ChipWhisperer capture hardware.
Extendable Target Options
Using the CW308 Targets, you can access devices including RISC-V, 8051, hardware cryptography, DPA-protected devices, and more!
Documentation
Specifications
ADC Specifications | 10-bit ADC, 105 MS/s maximum sample rate |
ADC Sample Clock Source | (1) Internal generator, (2) External input direct, (3) External input with phase adjustment, (4) External input with 4x multiplier, phase adjustment |
Analog Input | AC-Coupled, up to +55dB gain (adjustable) |
Trigger Sources (Glitch & ADC) | Rising/Falling Edge, Level |
GPIO Types | Serial, clock, logic line (i.e., for reset pin) |
GPIO Voltage | 3.3V |
Clock Generation Range | 5-200 MHz |
Clock Output Type | (1) Regular, (2) with glitch inserted, or (3) glitch output only |
Glitch Width (min) | ~1nS (depends on cabling used) |
Glitch Offset | Adjustable in < 200pS increments |
Crowbar pulse current | 20A |
USB Interface | Custom open-source USB firmware, up to 25 MB/s speed |
Sample Buffer Size | 24 573 |
Programming Protocols | Atmel ISP (for AVR), Atmel PDI (for XMEGA), STM32Fx Bootloader |
Connectors | Power Measurement In: SMA, Crowbar Glitch Out: SMA, Target Connector: IDC-20 |
Packing List
STM32F3 UFO Target | STM32F303 Target for CW308 UFO | 1 | NAE-CW308T-STM32F3 |
7.3728 MHz Crystal | Crystal for using UFO Board stand-alone | 1 | |
Prototyping UFO Target Boards | Prototyping boards for CW308 UFO | 3 | |
STM32F0 UFO Target | STM32F071 Target for CW308 UFO | 1 | NAE-CW308T-STM32F0 |
UFO Lifter Tool | 2 | ||
XMEGA UFO Target | XMEGA Target for CW308 UFO (Mouted on UFO Board) | 1 | NAE-CW308T-XMEGA |
SMA to BNC Adapter | SMA to BNC Adapter, for probes or instrumentation | 2 | |
SMA Tee | SMA Tee for performing DPA & voltage FI on UFO Board simultaneously | 1 | |
Micro-USB Cable (3 ft) | Micro-USB cable for ChipWhisperer-Lite | 1 | |
SMA Cables | Standard SMA cables | 3 | |
20-pin Ribbon/IDC Cable | 20-Pin Ribbon Cable for Connecting between boards | 1 |
