FIND NEWAE TECHNOLOGY PRODUCTS ON MOUSER ELECTRONICS
.png)
ChipWhisperer Level 2 Kit
MSRP:
$912 US
The SCAPACK-L2 extends the contents of the L1 kit: it starts with the same ChipWhisperer-Lite Capture along with a UFO Board and three targets: an 8-bit RISC, a 32-bit Cortex-M4 (STM32F3), and a 32-bit Cortex-M0 (STM32F0).
This kit allows you to complete almost all of the ChipWhisperer tutorials, along with working with the collection of CW308 UFO Boards.
This expanded kit includes several useful tools for working with external targets: a H-Probe (magnetic field probe), differential probe, isolated power supply for the probes, and level translator. This kit includes most of the accessories from the CW1200-Kit.
Features
ChipWhisperer-Lite features 105 MS/s ADC with adjustable gain.
Perform side-channel power analysis, voltage fault injection, or clock fault injection.
CW308 UFO Board features low-noise power supplies, probing points, and connectors to simplify usage.
XMEGA 8-bit RISC Target.
STM32F0 Cortex-M0 Target.
STM32F3 Cortex-M4 Target.
Probe set including magnetic-field (H-field) and differential probe with isolated power supply.
Level shifter for interfacing to external targets.
Educational Material
Using our Jupyter notebooks, you can learn how DPA works, how to break password checks, how fault injection works, and even more! Use the ChipWhisperer-Lite with our online training offerings.
Designed for DPA
ChipWhisperer-Lite is designed for power measurements. It integrates a high-gain LNA with a 10-bit ADC, and a flexible synchronous sampling mechanism unique to ChipWhisperer capture hardware.
Connect to External Targets
Beyond the available CW308 targets, the Level 2 kit includes the probes and accessories you might need when interfacing to external devices.
Documentation
Specifications
ADC Specifications | 10-bit ADC, 105 MS/s maximum sample rate |
ADC Sample Clock Source | (1) Internal generator, (2) External input direct, (3) External input with phase adjustment, (4) External input with 4x multiplier, phase adjustment |
Analog Input | AC-Coupled, up to +55dB gain (adjustable) |
Trigger Sources (Glitch & ADC) | Rising/Falling Edge, Level |
GPIO Types | Serial, clock, logic line (i.e., for reset pin) |
GPIO Voltage | 3.3V |
Clock Generation Range | 5-200 MHz |
Clock Output Type | (1) Regular, (2) with glitch inserted, or (3) glitch output only |
Glitch Width (min) | ~1nS (depends on cabling used) |
Glitch Offset | Adjustable in < 200pS increments |
Crowbar pulse current | 20A |
USB Interface | Custom open-source USB firmware, up to 25 MB/s speed |
Sample Buffer Size | 24 573 |
Programming Protocols | Atmel ISP (for AVR), Atmel PDI (for XMEGA), STM32Fx Bootloader |
Connectors | Power Measurement In: SMA, Crowbar Glitch Out: SMA, Target Connector: IDC-20 |
Packing List
STM32F3 UFO Target | STM32F303 Target for CW308 UFO | 1 | NAE-CW308T-STM32F3 |
5V DC 2.1mm barrel jack wall-wart | Power Supply for UFO Board (only required for 5V targets) | 1 | |
CW506 Advanced Breakout Board | Level shifter with additional connections for external targets. | 1 | |
7.3728 MHz Crystal | Crystal for using UFO Board stand-alone | 1 | |
Differential Probe | Differential probe, +/-5V input range | 1 | NAE-DIFFPROBE |
Prototyping UFO Target Boards | Prototyping boards for CW308 UFO | 3 | |
Low Noise Amplifier | 20 dB Low Noise Amplifier, Unshielded | 1 | |
Isolated Probe Power Supply | Isolated power supply for differential & LNA/H-Probe | 1 | NAE-CW503 |
5V DC USB Wall-wart | Wall adapter for Probe USO Power | 1 | |
SMA Coupler | SMA Coupler for connecting H-Probe to LNA Input Directly | 1 | |
STM32F0 UFO Target | STM32F071 Target for CW308 UFO | 1 | NAE-CW308T-STM32F0 |
UFO Lifter Tool | 2 | ||
XMEGA UFO Target | XMEGA Target for CW308 UFO (Mouted on UFO Board) | 1 | NAE-CW308T-XMEGA |
6-pin Ribbon/IDC Cable | Power cable for LNA & Diff-Probe | 3 | |
SMA to BNC Adapter | SMA to BNC Adapter, for probes or instrumentation | 2 | |
Planar H-Field Probe | Magnetic Field Probe, 15mm loop, Planar, Stubby | 1 | NAE-HPROBE-15 |
SMA Tee | SMA Tee for performing DPA & voltage FI on UFO Board simultaneously | 1 | |
Micro-USB Cable (3 ft) | Micro-USB cable for ChipWhisperer-Lite | 1 | |
Micro-USB Cable (6 ft) | Micro-USB cable for Probe PSU Power | 1 | |
SMA Cables | Standard SMA cables | 3 | |
20-pin Ribbon/IDC Cable | 20-Pin Ribbon Cable for Connecting between boards | 2 |
