FIND NEWAE TECHNOLOGY PRODUCTS ON MOUSER ELECTRONICS
.png)
conduct side-channel power analysis and fault injection attacks
uncover vulnerabilities
in your own
embedded systems
implement
robust security
countermeasure
Starter Kits
These kits contain the capture hardware (ChipWhisperer device) along with various targets and tools. You can perform almost all of the tutorials with these kits, and then extend them to start looking at real devices with the included connectivity tools. Review the comparison page for help determining which product you need.
side-channel power analysis
Single Board Solutions
All ChipWhisperer Capture boards are capable of power analysis and glitching.
ChipWhisperer-Nano is the lowest-cost option with limitations on the types of attacks that can be performed.
The original ChipWhisperer-Lite is a single board that integrates high-speed power measurement (replacing your oscilloscope), a target device, a programmer for the target device, a platform for performing fault injection, and much more. These boards are perfect if you want to teach yourself (or your class) all about side-channel power analysis & fault injection with minimal fuss.
​
Review the comparison page for help determining which board you need.
ChipWhisperer-Husky
MSRP
$549 USD
The newest and most robust addition to the line of ChipWhisperer capture hardware for working with side-channel power analysis and fault injection. Feature upgrades include high-speed logic analyzers (to visualize glitches), real-time data streaming for attacking asymmetric algorithms, support for JTAG/SWD programming with an FTDI-compatible mode, and additional I/O expansion pins.
Sample Rate
200 MS/s (20 MS/s streaming)
Buffer Size
>80000
Targets
XMEGA 8-Bit, STM32F3 32-Bit
VCC Glitching
Crowbar, 833ps resolution
Clock Glitching
Triggering
Yes
Rising/Falling Edge, Level, Waveform, Threshold, UART. Edge Count, Arm Trace
ChipWhisperer-Pro Kit
MSRP
$3800 US
*DISCONTINUED AS OF JUNE 2023* Our most advanced capture hardware lets you trigger on analog waveforms, and capture long power traces such as the ones asymmetric algorithms generate.
Sample Rate
105 MS/s (10 MS/s streaming)
Buffer Size
96000 (unlimited in streaming)
Targets
XMEGA 8-Bit, STM32F3 32-Bit
VCC Glitching
Crowbar, < 1nS resolution
Clock Glitching
Triggering
Yes
Waveform, SPI, UART, Rising/Falling Edge, Level
Target Boards
These targets were designed to be used with the ChipWhisperer capture platform, but they are flexible enough to be used with a standard oscilloscope and computer to drive the target.
These target boards require the CW308 UFO base board to function. They have a variety of processor architectures to allow you to easily experiment with different devices under a (fairly) standard environment. Note that some boards may need external programmers (such as Segger J-Link or OpenOCD) to reflash the chip. Check the datasheet and documentation before purchasing if you are unsure!
