Questions on using the hardware, FPGA design, building your own, custom interfaces, etc.
#1176 by keesj
Sat Mar 11, 2017 6:23 am
Hi,

I am using the CW-lite to generate my 16MHz, clock for an Arduino. When I look at the signal on the scope I see the frequency varying between 15.9 and 16.1 MHz. Is the expected accuracy?

Image
Image
#1180 by gdeon
Mon Mar 13, 2017 7:47 am
Hi Kees,

The ChipWhisperer outputs are much better than that. How accurate is your scope?
#1188 by keesj
Sun Mar 19, 2017 9:32 am
The Scope is a 100Mhz Rigol scope. On the second trace I see that trigger is low. I will perform more measurements.

Who is online

Users browsing this forum: No registered users and 1 guest